Products

YK-630 alloy atomic ash is suitable for many kinds of metal substrate surfaces including galvanized sheet. The ratio of atomic ash to curing agent is 100:1-2.5, and the operation time is 3-5 minutes, which is especially suitable for the fast repair of 4S station.

Withstand high temperature baking, 220°C high temperature baking without blistering, suitable for various substrates in manufacturing industry.

ongxiang Precision Machinery Co.,Ltd, Meiding Machinery Manufacturing Factory, Dongguan City Nameco Company, Ding Sheng Machinery Co.

General purpose atomic ash includes four types of atomic ash such as AoWoDa, Dillon, V6, T9, etc. It is a product with a wide range of application and high cost performance. The ratio of atomic ash to curing agent is 100:1.5-3 (weight ratio), and the operating time is about 5-7 minutes.

It is mainly used for repairing pits on the surface of FRP parts and filling deep holes and other special profiles with excellent performance in all aspects.

Epoxy atomic ash mainly consists of talc and epoxy resin, the standard mixing rate of main agent and curing agent is 1:1, can be coated and scraped for 30-50 minutes, can be sanded for 15 hours, note: cannot be scraped more than 2mm at a time.

YK-500 Gaote Atomic Grey, before construction, it needs to be blended with 100:1.5-3 (weight ratio), the operable time is 9-13 minutes, and 60-80 minutes after scraping, it can be dry-ground.

YK-310 AoW large atomic gray, fine gray body, good scraping, good sanding. It has excellent adhesion to many kinds of substrates, and is a very hot selling atomic ash among general-purpose atomic ash.

Mainly suitable for light rail trains, moving trains, and other automobiles, machine tool industry on a large area scraping, operation time up to 60 minutes, and 180 minutes can be sanded.

YK-670 PU atomic ash, small curing shrinkage, high coating density, excellent adhesion, good durability. It is mainly used for wind turbine blades, etc.

YK-630 alloy atomic ash is suitable for many kinds of metal substrate surfaces including galvanized sheet. The ratio of atomic ash to curing agent is 100:1-2.5, and the operation time is 3-5 minutes, which is especially suitable for the fast repair of 4S station.

Withstand high temperature baking, 220°C high temperature baking without blistering, suitable for various substrates in manufacturing industry.