Poly putty

Mainly suitable for light rail trains, moving trains, and other automobiles, machine tool industry on a large area scraping, operation time up to 60 minutes, and 180 minutes can be sanded.

YK-670 PU atomic ash, small curing shrinkage, high coating density, excellent adhesion, good durability. It is mainly used for wind turbine blades, etc.

YK-630 alloy atomic ash is suitable for many kinds of metal substrate surfaces including galvanized sheet. The ratio of atomic ash to curing agent is 100:1-2.5, and the operation time is 3-5 minutes, which is especially suitable for the fast repair of 4S station.

Withstand high temperature baking, 220°C high temperature baking without blistering, suitable for various substrates in manufacturing industry.

Customized according to demand Controllability of the formula,The consistency and operable time can be customized,Daily output of 278 tons, selling all over the country,The formula can be adjusted according to different regions and seasons.

The heat resistance of this atomic ash can reach 90 degrees * 5h, operating in a high temperature environment, the atomic ash layer does not dehisce, does not crack, does not fall off, does not need extra processing, grinding is convenient and quick.

It is mainly used for repairing pits on the surface of FRP parts and filling deep holes and other special profiles with excellent performance in all aspects.

Epoxy atomic ash mainly consists of talc and epoxy resin, the standard mixing rate of main agent and curing agent is 1:1, can be coated and scraped for 30-50 minutes, can be sanded for 15 hours, note: cannot be scraped more than 2mm at a time.

Strong adhesion, pulling apart method test, adhesion ≥5Mpa, not easy to fall off, strong durability.